{"id":31121,"date":"2026-08-19T05:57:41","date_gmt":"2026-08-19T05:57:41","guid":{"rendered":"https:\/\/hardnesstests.com\/?p=31121"},"modified":"2026-08-19T05:57:43","modified_gmt":"2026-08-19T05:57:43","slug":"hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing","status":"publish","type":"post","link":"https:\/\/hardnesstests.com\/es\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\/","title":{"rendered":"Hardness Tester Anvils: 7 Essential Factors for Accurate Hardness Testing"},"content":{"rendered":"<h2 class=\"wp-block-heading\" id=\"h-introduction-to-hardness-tester-anvils\"><strong>Introduction to Hardness Tester Anvils<\/strong><\/h2>\n\n\n\n<p><strong>Hardness tester anvils<\/strong> are important support components used to hold test specimens securely during hardness measurement. Although they don&#8217;t directly create the indentation, they can have a major influence on the stability and repeatability of the test.<\/p>\n\n\n\n<p>A hardness test requires more than a force system and an indenter. The specimen must also be properly supported.<\/p>\n\n\n\n<p>If a sample moves, tilts, rocks, or bends during testing, the applied force may not be transferred as intended. This can contribute to inconsistent indentation geometry or hardness readings.<\/p>\n\n\n\n<p>A suitable anvil provides a stable contact surface beneath the specimen.<\/p>\n\n\n\n<p>Common anvil designs include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Flat anvils<\/li>\n\n\n\n<li>V-anvils<\/li>\n\n\n\n<li>Pointed anvils<\/li>\n\n\n\n<li>Cylindrical anvils<\/li>\n\n\n\n<li>Small-sample supports<\/li>\n\n\n\n<li>Specialized fixtures<\/li>\n<\/ul>\n\n\n\n<p>The right choice depends on the specimen geometry and hardness-testing method.<\/p>\n\n\n\n<p>For industrial quality control and laboratory testing, selecting the correct anvil is therefore an important part of building a reliable hardness measurement system.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-what-are-hardness-tester-anvils\"><strong>What Are Hardness Tester Anvils?<\/strong><\/h2>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"h-basic-function\"><strong>Basic Function<\/strong><\/h3>\n\n\n\n<p>A hardness tester anvil is the support surface or fixture placed beneath the specimen during a hardness test.<\/p>\n\n\n\n<p>Its main functions are to:<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li>Support the specimen.<\/li>\n\n\n\n<li>Maintain specimen stability.<\/li>\n\n\n\n<li>Provide an appropriate contact surface.<\/li>\n\n\n\n<li>Help keep the test area correctly positioned.<\/li>\n\n\n\n<li>Reduce unwanted movement during loading.<\/li>\n<\/ol>\n\n\n\n<p>A typical arrangement looks like this:<\/p>\n\n\n\n<p><strong>Hardness tester \u2192 Indenter \u2192 Test specimen \u2192 Anvil<\/strong><\/p>\n\n\n\n<p>The indenter applies the test force from above while the anvil supports the specimen from below.<\/p>\n\n\n\n<figure class=\"wp-block-image aligncenter size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"681\" height=\"800\" src=\"https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/40-681x800.jpg\" alt=\"\" class=\"wp-image-30304\" srcset=\"https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/40-681x800.jpg 681w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/40-255x300.jpg 255w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/40-768x902.jpg 768w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/40-10x12.jpg 10w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/40-700x822.jpg 700w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/40-150x176.jpg 150w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/40.jpg 927w\" sizes=\"auto, (max-width: 681px) 100vw, 681px\" \/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"h-why-specimen-support-matters\"><strong>Why Specimen Support Matters<\/strong><\/h3>\n\n\n\n<p>Imagine trying to press a precise indentation into a metal sample while the sample is slightly rocking underneath the indenter.<\/p>\n\n\n\n<p>The result may not be consistent.<\/p>\n\n\n\n<p>A stable anvil helps prevent this problem by creating a firm foundation for the specimen.<\/p>\n\n\n\n<p>This becomes especially important when testing:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Small parts<\/li>\n\n\n\n<li>Curved components<\/li>\n\n\n\n<li>Thin sections<\/li>\n\n\n\n<li>Cylindrical samples<\/li>\n\n\n\n<li>Irregularly shaped components<\/li>\n<\/ul>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-how-hardness-tester-anvils-work\"><strong>How Hardness Tester Anvils Work<\/strong><\/h1>\n\n\n\n<p>The anvil transfers the reaction force from the specimen into the hardness tester structure.<\/p>\n\n\n\n<p>During testing, the indenter pushes downward.<\/p>\n\n\n\n<p>The specimen experiences the test force.<\/p>\n\n\n\n<p>The anvil provides the supporting reaction.<\/p>\n\n\n\n<p>This creates a controlled mechanical system.<\/p>\n\n\n\n<p>The anvil should be sufficiently rigid and properly positioned so that unnecessary movement or deformation doesn&#8217;t interfere with the measurement.<\/p>\n\n\n\n<p>The specimen should also sit securely on the appropriate contact surface.<\/p>\n\n\n\n<p>For flat specimens, a flat anvil may be ideal.<\/p>\n\n\n\n<p>For cylindrical specimens, a V-anvil can provide better positioning.<\/p>\n\n\n\n<p>For small or specialized parts, a dedicated fixture may be necessary.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-common-types-of-hardness-tester-anvils\"><strong>Common Types of Hardness Tester Anvils<\/strong><\/h1>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-flat-anvils\"><strong>Flat Anvils<\/strong><\/h2>\n\n\n\n<p>Flat anvils are among the most common designs.<\/p>\n\n\n\n<p>They are suitable for relatively flat specimens with a stable bottom surface.<\/p>\n\n\n\n<p>Entre las aplicaciones m\u00e1s habituales se incluyen:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Plates<\/li>\n\n\n\n<li>Blocks<\/li>\n\n\n\n<li>Flat machined components<\/li>\n\n\n\n<li>Metal coupons<\/li>\n<\/ul>\n\n\n\n<p>A flat anvil provides broad support beneath the specimen.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-v-anvils\"><strong>V-Anvils<\/strong><\/h2>\n\n\n\n<p>V-anvils are designed for cylindrical or rounded specimens.<\/p>\n\n\n\n<p>The V-shaped groove helps locate and support components such as:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Ejes<\/li>\n\n\n\n<li>Rods<\/li>\n\n\n\n<li>Tubes<\/li>\n\n\n\n<li>Cylindrical bars<\/li>\n<\/ul>\n\n\n\n<p>Without suitable support, a round specimen can move during loading.<\/p>\n\n\n\n<p>A V-anvil reduces this risk.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-pointed-and-specialized-anvils\"><strong>Pointed and Specialized Anvils<\/strong><\/h2>\n\n\n\n<p>Some specimens require specialized support.<\/p>\n\n\n\n<p>Pointed or small-contact anvils may be used for particular geometries where a conventional flat surface isn&#8217;t suitable.<\/p>\n\n\n\n<p>These anvils should be selected according to the tester manufacturer&#8217;s recommendations and the applicable test method.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-cylindrical-and-small-sample-anvils\"><strong>Cylindrical and Small-Sample Anvils<\/strong><\/h2>\n\n\n\n<p>Small components may require a specialized support fixture.<\/p>\n\n\n\n<p>Algunos ejemplos son:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Small pins<\/li>\n\n\n\n<li>Thin parts<\/li>\n\n\n\n<li>Small metal coupons<\/li>\n\n\n\n<li>Componentes de precisi\u00f3n<\/li>\n<\/ul>\n\n\n\n<p>The objective is always the same: provide stable support without interfering with the test area.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-7-key-benefits-of-hardness-tester-anvils\"><strong>7 Key Benefits of Hardness Tester Anvils<\/strong><\/h1>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-1-stable-specimen-support\"><strong>1. Stable Specimen Support<\/strong><\/h2>\n\n\n\n<p>The primary benefit is stability.<\/p>\n\n\n\n<p>A rigid, suitable anvil helps prevent the specimen from shifting during the test.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-2-better-measurement-repeatability\"><strong>2. Better Measurement Repeatability<\/strong><\/h2>\n\n\n\n<p>Stable support can contribute to more consistent hardness results.<\/p>\n\n\n\n<p>If the same specimen is tested repeatedly under controlled conditions, the support system should behave consistently.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-3-reduced-sample-movement\"><strong>3. Reduced Sample Movement<\/strong><\/h2>\n\n\n\n<p>Movement is particularly problematic with:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Cylindrical parts<\/li>\n\n\n\n<li>Componentes peque\u00f1os<\/li>\n\n\n\n<li>Uneven specimens<\/li>\n\n\n\n<li>Curved surfaces<\/li>\n<\/ul>\n\n\n\n<p>The correct anvil can significantly improve positioning.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-4-flexible-testing\"><strong>4. Flexible Testing<\/strong><\/h2>\n\n\n\n<p>Different anvils allow one hardness tester to accommodate different specimen geometries.<\/p>\n\n\n\n<p>Instead of replacing the entire machine, an operator can select an appropriate support accessory.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-5-improved-operator-efficiency\"><strong>5. Improved Operator Efficiency<\/strong><\/h2>\n\n\n\n<p>A well-designed anvil makes specimen positioning easier.<\/p>\n\n\n\n<p>This can speed up production inspection and reduce setup errors.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-6-better-contact-conditions\"><strong>6. Better Contact Conditions<\/strong><\/h2>\n\n\n\n<p>The anvil provides a controlled contact surface between the specimen and tester.<\/p>\n\n\n\n<p>Good contact helps ensure that the specimen is properly supported during loading.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-7-support-for-different-specimen-geometries\"><strong>7. Support for Different Specimen Geometries<\/strong><\/h2>\n\n\n\n<p>A range of anvil designs makes hardness testing more versatile.<\/p>\n\n\n\n<p>A laboratory may use different supports for:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Flat plates<\/li>\n\n\n\n<li>Round bars<\/li>\n\n\n\n<li>Tubes<\/li>\n\n\n\n<li>Small parts<\/li>\n\n\n\n<li>Irregular components<\/li>\n<\/ul>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-hardness-tester-anvil-materials\"><strong>Hardness Tester Anvil Materials<\/strong><\/h1>\n\n\n\n<p>Anvils are generally made from rigid materials capable of resisting deformation under the intended test conditions.<\/p>\n\n\n\n<p>Common considerations include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Dureza<\/li>\n\n\n\n<li>Strength<\/li>\n\n\n\n<li>Dimensional stability<\/li>\n\n\n\n<li>Resistencia al desgaste<\/li>\n\n\n\n<li>Surface finish<\/li>\n<\/ul>\n\n\n\n<p>The support surface should remain stable during testing.<\/p>\n\n\n\n<p>If the anvil itself becomes significantly damaged or deformed, specimen support can be affected.<\/p>\n\n\n\n<p>For critical applications, use anvils specified or approved by the hardness tester manufacturer.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-how-to-choose-the-right-anvil\"><strong>How to Choose the Right Anvil<\/strong><\/h1>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-1-consider-specimen-shape\"><strong>1. Consider Specimen Shape<\/strong><\/h2>\n\n\n\n<p>This is usually the first consideration.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Specimen<\/th><th>Typical Anvil<\/th><\/tr><\/thead><tbody><tr><td>Flat plate<\/td><td>Flat anvil<\/td><\/tr><tr><td>Round bar<\/td><td>V-anvil<\/td><\/tr><tr><td>Shaft<\/td><td>V-anvil<\/td><\/tr><tr><td>Small part<\/td><td>Specialized support<\/td><\/tr><tr><td>Irregular geometry<\/td><td>Dedicated fixture<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p>The actual selection should follow the testing machine and applicable method requirements.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<figure class=\"wp-block-image aligncenter size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"800\" height=\"800\" src=\"https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/25-800x800.jpg\" alt=\"\" class=\"wp-image-30277\" srcset=\"https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/25-800x800.jpg 800w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/25-300x300.jpg 300w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/25-150x150.jpg 150w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/25-768x768.jpg 768w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/25-12x12.jpg 12w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/25-400x400.jpg 400w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/25-700x700.jpg 700w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/25.jpg 1200w\" sizes=\"auto, (max-width: 800px) 100vw, 800px\" \/><figcaption class=\"wp-element-caption\">Versi\u00f3n 1.0.0<\/figcaption><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-2-consider-specimen-size\"><strong>2. Consider Specimen Size<\/strong><\/h2>\n\n\n\n<p>The anvil must provide adequate support without interfering with the test area.<\/p>\n\n\n\n<p>A support that is too small may allow movement.<\/p>\n\n\n\n<p>A support that is too large may not fit the component correctly.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-3-consider-the-hardness-testing-method\"><strong>3. Consider the Hardness Testing Method<\/strong><\/h2>\n\n\n\n<p>Different hardness methods may have different support requirements.<\/p>\n\n\n\n<p>Consider whether the tester performs:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Rockwell<\/li>\n\n\n\n<li>Brinell<\/li>\n\n\n\n<li>Vickers<\/li>\n\n\n\n<li><a href=\"https:\/\/hardnesstests.com\/es\/products\/\">Micro Vickers<\/a><\/li>\n\n\n\n<li><a href=\"https:\/\/hardnesstests.com\/es\/products\/\">Other indentation methods<\/a><\/li>\n<\/ul>\n\n\n\n<p>The applicable standard and equipment manufacturer should guide the final choice.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-4-check-surface-condition\"><strong>4. Check Surface Condition<\/strong><\/h2>\n\n\n\n<p>The anvil contact surface should be clean and free from unnecessary damage.<\/p>\n\n\n\n<p>Rust, debris, chips, or excessive wear can interfere with proper specimen seating.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-5-confirm-machine-compatibility\"><strong>5. Confirm Machine Compatibility<\/strong><\/h2>\n\n\n\n<p>Before purchasing an anvil, check:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Tester model<\/li>\n\n\n\n<li>Anvil mounting system<\/li>\n\n\n\n<li>Anvil dimensions<\/li>\n\n\n\n<li>Working height<\/li>\n\n\n\n<li>Test-force range<\/li>\n\n\n\n<li>Manufacturer specifications<\/li>\n<\/ul>\n\n\n\n<p>A physically similar anvil isn&#8217;t necessarily compatible.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-hardness-tester-anvils-for-rockwell-testing\"><strong>Hardness Tester Anvils for Rockwell Testing<\/strong><\/h1>\n\n\n\n<p>Rockwell hardness testers frequently use interchangeable anvils to accommodate different specimen shapes.<\/p>\n\n\n\n<p>For example, a flat anvil can support flat specimens, while a V-anvil can help position cylindrical components.<\/p>\n\n\n\n<p>Because Rockwell testing relies on penetration depth, specimen movement during loading can influence measurement reliability.<\/p>\n\n\n\n<p>A stable support is therefore important.<\/p>\n\n\n\n<p>ASTM E18 provides requirements for Rockwell hardness testing of metallic materials.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-hardness-tester-anvils-for-brinell-and-vickers-testing\"><strong>Hardness Tester Anvils for Brinell and Vickers Testing<\/strong><\/h1>\n\n\n\n<p>Brinell and Vickers testing can also require appropriate specimen support.<\/p>\n\n\n\n<p>For Brinell testing, the relatively large test force makes rigid specimen support particularly important.<\/p>\n\n\n\n<p>For Vickers testing, especially at lower forces, stable positioning helps maintain consistent indentation conditions.<\/p>\n\n\n\n<p>For small or irregular samples, specialized supports can be useful.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-anvil-verification-and-maintenance\"><strong>Anvil Verification and Maintenance<\/strong><\/h1>\n\n\n\n<p>Anvils don&#8217;t typically require the same type of calibration as a force-measuring system, but they should still be inspected.<\/p>\n\n\n\n<p>Check for:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Surface damage<\/li>\n\n\n\n<li>Burrs<\/li>\n\n\n\n<li>Cracks<\/li>\n\n\n\n<li>Excessive wear<\/li>\n\n\n\n<li>Corrosion<\/li>\n\n\n\n<li>Deformation<\/li>\n\n\n\n<li><a href=\"https:\/\/hardnesstests.com\/es\/products\/\">Contamination<\/a><\/li>\n<\/ul>\n\n\n\n<p>The contact surface should remain suitable for supporting the specimen.<\/p>\n\n\n\n<p>A damaged anvil may cause the sample to rock or sit incorrectly.<\/p>\n\n\n\n<p>Regular inspection should be incorporated into the laboratory or production maintenance program.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-common-anvil-problems\"><strong>Common Anvil Problems<\/strong><\/h1>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-worn-contact-surface\"><strong>Worn Contact Surface<\/strong><\/h2>\n\n\n\n<p>Repeated testing can gradually wear the support surface.<\/p>\n\n\n\n<p><strong>Effect:<\/strong> Specimen may not sit correctly.<\/p>\n\n\n\n<p><strong>Solution:<\/strong> Inspect and replace the anvil when necessary.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-incorrect-anvil-selection\"><strong>Incorrect Anvil Selection<\/strong><\/h2>\n\n\n\n<p>A flat anvil may not properly support a cylindrical specimen.<\/p>\n\n\n\n<p><strong>Effect:<\/strong> Movement during testing.<\/p>\n\n\n\n<p><strong>Solution:<\/strong> Use a V-anvil or suitable fixture.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-contamination\"><strong>Contamination<\/strong><\/h2>\n\n\n\n<p>Metal chips and debris can prevent full contact.<\/p>\n\n\n\n<p><strong>Solution:<\/strong> Clean the anvil before testing.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-damaged-surface\"><strong>Damaged Surface<\/strong><\/h2>\n\n\n\n<p>Dents or burrs can affect specimen seating.<\/p>\n\n\n\n<p><strong>Solution:<\/strong> Remove the damaged anvil from service until it has been evaluated.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-frequently-asked-questions\"><strong>Preguntas frecuentes<\/strong><\/h1>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-1-what-are-hardness-tester-anvils-used-for\"><strong>1. What are hardness tester anvils used for?<\/strong><\/h2>\n\n\n\n<p>They support and stabilize specimens beneath the indenter during hardness testing.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-2-why-is-an-anvil-important-for-hardness-testing\"><strong>2. Why is an anvil important for hardness testing?<\/strong><\/h2>\n\n\n\n<p>A stable support helps prevent specimen movement and can improve the consistency of hardness measurements.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-3-what-is-a-v-anvil-used-for\"><strong>3. What is a V-anvil used for?<\/strong><\/h2>\n\n\n\n<p>A V-anvil is commonly used to support cylindrical or rounded specimens such as shafts, rods, and tubes.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-4-can-one-anvil-be-used-for-every-specimen\"><strong>4. Can one anvil be used for every specimen?<\/strong><\/h2>\n\n\n\n<p>Not always. Different specimen shapes may require different anvils or specialized fixtures.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-5-do-hardness-tester-anvils-need-calibration\"><strong>5. Do hardness tester anvils need calibration?<\/strong><\/h2>\n\n\n\n<p>The requirements depend on the equipment, testing method, and quality system. However, anvils should always be inspected for damage, wear, cleanliness, and suitability.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-6-can-a-damaged-anvil-affect-hardness-results\"><strong>6. Can a damaged anvil affect hardness results?<\/strong><\/h2>\n\n\n\n<p>Yes. If the specimen isn&#8217;t properly supported, movement or unstable contact can contribute to unreliable measurements.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-7-how-do-i-choose-a-hardness-tester-anvil\"><strong>7. How do I choose a hardness tester anvil?<\/strong><\/h2>\n\n\n\n<p>Consider specimen shape, size, test method, machine model, support requirements, and applicable manufacturer or standard requirements.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-8-how-should-hardness-tester-anvils-be-maintained\"><strong>8. How should hardness tester anvils be maintained?<\/strong><\/h2>\n\n\n\n<p>Keep them clean, protect the contact surfaces from damage, inspect them regularly, and replace them when excessive wear or deformation affects specimen support.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-conclusion\"><strong>Conclusi\u00f3n<\/strong><\/h1>\n\n\n\n<p><strong>Hardness tester anvils<\/strong> may look like simple accessories, but they play an important role in creating stable testing conditions. A hardness measurement isn&#8217;t produced by the indenter alone\u2014the specimen, support system, force mechanism, and measurement system all work together.<\/p>\n\n\n\n<p>The right anvil helps keep the specimen stable, correctly positioned, and properly supported during loading. Flat anvils are useful for flat samples, while V-anvils and specialized fixtures provide better support for cylindrical, small, or unusual components.<\/p>\n\n\n\n<p>When selecting an anvil, consider <strong>specimen geometry, size, hardness testing method, machine compatibility, surface condition, and manufacturer requirements<\/strong>. Regular inspection and cleaning are also essential.<\/p>\n\n\n\n<p>For manufacturing plants, quality-control departments, and laboratories, choosing and maintaining the correct anvil is a simple but effective way to improve testing stability, repeatability, and overall measurement confidence.<\/p>","protected":false},"excerpt":{"rendered":"<p>Introduction to Hardness Tester Anvils Hardness tester anvils are important support components used to hold test specimens securely during hardness<\/p>","protected":false},"author":4,"featured_media":30247,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[117],"tags":[260],"class_list":["post-31121","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-hardness-tester","tag-hardness-tester-anvils"],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v25.4 (Yoast SEO v28.1) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>Hardness Tester Anvils: 7 Essential Factors for Accurate Hardness Testing - hardnesstests<\/title>\n<meta name=\"description\" content=\"Learn how hardness tester anvils support stable and accurate hardness measurements, material selection, specimen support.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/hardnesstests.com\/es\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\/\" \/>\n<meta property=\"og:locale\" content=\"es_ES\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Hardness Tester Anvils: 7 Essential Factors for Accurate Hardness Testing\" \/>\n<meta property=\"og:description\" content=\"Learn how hardness tester anvils support stable and accurate hardness measurements, material selection, specimen support.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/hardnesstests.com\/es\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\/\" \/>\n<meta property=\"og:site_name\" content=\"hardnesstests\" \/>\n<meta property=\"article:published_time\" content=\"2026-08-19T05:57:41+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-08-19T05:57:43+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/16.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1200\" \/>\n\t<meta property=\"og:image:height\" content=\"800\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"tingting\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Escrito por\" \/>\n\t<meta name=\"twitter:data1\" content=\"tingting\" \/>\n\t<meta name=\"twitter:label2\" content=\"Tiempo de lectura\" \/>\n\t<meta name=\"twitter:data2\" content=\"10 minutos\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\\\/\"},\"author\":{\"name\":\"tingting\",\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/#\\\/schema\\\/person\\\/4dfcde616788fc5d9ece9551a87be8ce\"},\"headline\":\"Hardness Tester Anvils: 7 Essential Factors for Accurate Hardness Testing\",\"datePublished\":\"2026-08-19T05:57:41+00:00\",\"dateModified\":\"2026-08-19T05:57:43+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\\\/\"},\"wordCount\":1606,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/hardnesstests.com\\\/wp-content\\\/uploads\\\/2026\\\/01\\\/16.jpg\",\"keywords\":[\"hardness tester anvils\"],\"articleSection\":[\"Hardness Tester\"],\"inLanguage\":\"es\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/hardnesstests.com\\\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\\\/\",\"url\":\"https:\\\/\\\/hardnesstests.com\\\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\\\/\",\"name\":\"Hardness Tester Anvils: 7 Essential Factors for Accurate Hardness Testing - hardnesstests\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/hardnesstests.com\\\/wp-content\\\/uploads\\\/2026\\\/01\\\/16.jpg\",\"datePublished\":\"2026-08-19T05:57:41+00:00\",\"dateModified\":\"2026-08-19T05:57:43+00:00\",\"description\":\"Learn how hardness tester anvils support stable and accurate hardness measurements, material selection, specimen support.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\\\/#breadcrumb\"},\"inLanguage\":\"es\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/hardnesstests.com\\\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"es\",\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\\\/#primaryimage\",\"url\":\"https:\\\/\\\/hardnesstests.com\\\/wp-content\\\/uploads\\\/2026\\\/01\\\/16.jpg\",\"contentUrl\":\"https:\\\/\\\/hardnesstests.com\\\/wp-content\\\/uploads\\\/2026\\\/01\\\/16.jpg\",\"width\":1200,\"height\":800},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"\u9996\u9875\",\"item\":\"https:\\\/\\\/hardnesstests.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Hardness Tester Anvils: 7 Essential Factors for Accurate Hardness Testing\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/#website\",\"url\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/\",\"name\":\"hardnesstests\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"es\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/#organization\",\"name\":\"hardnesstests\",\"url\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"es\",\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/hardnesstests.com\\\/wp-content\\\/uploads\\\/2021\\\/08\\\/\u5fae\u4fe1\u56fe\u7247_20251029102004_335_1287.png\",\"contentUrl\":\"https:\\\/\\\/hardnesstests.com\\\/wp-content\\\/uploads\\\/2021\\\/08\\\/\u5fae\u4fe1\u56fe\u7247_20251029102004_335_1287.png\",\"width\":1308,\"height\":467,\"caption\":\"hardnesstests\"},\"image\":{\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/#\\\/schema\\\/person\\\/4dfcde616788fc5d9ece9551a87be8ce\",\"name\":\"tingting\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"es\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/860054326773b5d7efd55599c34646197790b492767738ff1ddf0e0ba0e05c7d?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/860054326773b5d7efd55599c34646197790b492767738ff1ddf0e0ba0e05c7d?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/860054326773b5d7efd55599c34646197790b492767738ff1ddf0e0ba0e05c7d?s=96&d=mm&r=g\",\"caption\":\"tingting\"},\"url\":\"https:\\\/\\\/hardnesstests.com\\\/es\\\/author\\\/tingting\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Hardness Tester Anvils: 7 Essential Factors for Accurate Hardness Testing - hardnesstests","description":"Learn how hardness tester anvils support stable and accurate hardness measurements, material selection, specimen support.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/hardnesstests.com\/es\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\/","og_locale":"es_ES","og_type":"article","og_title":"Hardness Tester Anvils: 7 Essential Factors for Accurate Hardness Testing","og_description":"Learn how hardness tester anvils support stable and accurate hardness measurements, material selection, specimen support.","og_url":"https:\/\/hardnesstests.com\/es\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\/","og_site_name":"hardnesstests","article_published_time":"2026-08-19T05:57:41+00:00","article_modified_time":"2026-08-19T05:57:43+00:00","og_image":[{"width":1200,"height":800,"url":"https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/16.jpg","type":"image\/jpeg"}],"author":"tingting","twitter_card":"summary_large_image","twitter_misc":{"Escrito por":"tingting","Tiempo de lectura":"10 minutos"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/hardnesstests.com\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\/#article","isPartOf":{"@id":"https:\/\/hardnesstests.com\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\/"},"author":{"name":"tingting","@id":"https:\/\/hardnesstests.com\/tr\/#\/schema\/person\/4dfcde616788fc5d9ece9551a87be8ce"},"headline":"Hardness Tester Anvils: 7 Essential Factors for Accurate Hardness Testing","datePublished":"2026-08-19T05:57:41+00:00","dateModified":"2026-08-19T05:57:43+00:00","mainEntityOfPage":{"@id":"https:\/\/hardnesstests.com\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\/"},"wordCount":1606,"commentCount":0,"publisher":{"@id":"https:\/\/hardnesstests.com\/tr\/#organization"},"image":{"@id":"https:\/\/hardnesstests.com\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\/#primaryimage"},"thumbnailUrl":"https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/16.jpg","keywords":["hardness tester anvils"],"articleSection":["Hardness Tester"],"inLanguage":"es","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/hardnesstests.com\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/hardnesstests.com\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\/","url":"https:\/\/hardnesstests.com\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\/","name":"Hardness Tester Anvils: 7 Essential Factors for Accurate Hardness Testing - hardnesstests","isPartOf":{"@id":"https:\/\/hardnesstests.com\/tr\/#website"},"primaryImageOfPage":{"@id":"https:\/\/hardnesstests.com\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\/#primaryimage"},"image":{"@id":"https:\/\/hardnesstests.com\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\/#primaryimage"},"thumbnailUrl":"https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/16.jpg","datePublished":"2026-08-19T05:57:41+00:00","dateModified":"2026-08-19T05:57:43+00:00","description":"Learn how hardness tester anvils support stable and accurate hardness measurements, material selection, specimen support.","breadcrumb":{"@id":"https:\/\/hardnesstests.com\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\/#breadcrumb"},"inLanguage":"es","potentialAction":[{"@type":"ReadAction","target":["https:\/\/hardnesstests.com\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\/"]}]},{"@type":"ImageObject","inLanguage":"es","@id":"https:\/\/hardnesstests.com\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\/#primaryimage","url":"https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/16.jpg","contentUrl":"https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/16.jpg","width":1200,"height":800},{"@type":"BreadcrumbList","@id":"https:\/\/hardnesstests.com\/hardness-tester-anvils-7-essential-factors-for-accurate-hardness-testing\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"\u9996\u9875","item":"https:\/\/hardnesstests.com\/"},{"@type":"ListItem","position":2,"name":"Hardness Tester Anvils: 7 Essential Factors for Accurate Hardness Testing"}]},{"@type":"WebSite","@id":"https:\/\/hardnesstests.com\/tr\/#website","url":"https:\/\/hardnesstests.com\/tr\/","name":"hardnesstests","description":"","publisher":{"@id":"https:\/\/hardnesstests.com\/tr\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/hardnesstests.com\/tr\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"es"},{"@type":"Organization","@id":"https:\/\/hardnesstests.com\/tr\/#organization","name":"hardnesstests","url":"https:\/\/hardnesstests.com\/tr\/","logo":{"@type":"ImageObject","inLanguage":"es","@id":"https:\/\/hardnesstests.com\/tr\/#\/schema\/logo\/image\/","url":"https:\/\/hardnesstests.com\/wp-content\/uploads\/2021\/08\/\u5fae\u4fe1\u56fe\u7247_20251029102004_335_1287.png","contentUrl":"https:\/\/hardnesstests.com\/wp-content\/uploads\/2021\/08\/\u5fae\u4fe1\u56fe\u7247_20251029102004_335_1287.png","width":1308,"height":467,"caption":"hardnesstests"},"image":{"@id":"https:\/\/hardnesstests.com\/tr\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/hardnesstests.com\/tr\/#\/schema\/person\/4dfcde616788fc5d9ece9551a87be8ce","name":"tingting","image":{"@type":"ImageObject","inLanguage":"es","@id":"https:\/\/secure.gravatar.com\/avatar\/860054326773b5d7efd55599c34646197790b492767738ff1ddf0e0ba0e05c7d?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/860054326773b5d7efd55599c34646197790b492767738ff1ddf0e0ba0e05c7d?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/860054326773b5d7efd55599c34646197790b492767738ff1ddf0e0ba0e05c7d?s=96&d=mm&r=g","caption":"tingting"},"url":"https:\/\/hardnesstests.com\/es\/author\/tingting\/"}]}},"_links":{"self":[{"href":"https:\/\/hardnesstests.com\/es\/wp-json\/wp\/v2\/posts\/31121","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/hardnesstests.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/hardnesstests.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/hardnesstests.com\/es\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/hardnesstests.com\/es\/wp-json\/wp\/v2\/comments?post=31121"}],"version-history":[{"count":1,"href":"https:\/\/hardnesstests.com\/es\/wp-json\/wp\/v2\/posts\/31121\/revisions"}],"predecessor-version":[{"id":31122,"href":"https:\/\/hardnesstests.com\/es\/wp-json\/wp\/v2\/posts\/31121\/revisions\/31122"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/hardnesstests.com\/es\/wp-json\/wp\/v2\/media\/30247"}],"wp:attachment":[{"href":"https:\/\/hardnesstests.com\/es\/wp-json\/wp\/v2\/media?parent=31121"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/hardnesstests.com\/es\/wp-json\/wp\/v2\/categories?post=31121"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/hardnesstests.com\/es\/wp-json\/wp\/v2\/tags?post=31121"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}