{"id":31171,"date":"2026-09-02T02:00:44","date_gmt":"2026-09-02T02:00:44","guid":{"rendered":"https:\/\/hardnesstests.com\/?p=31171"},"modified":"2026-09-02T02:00:46","modified_gmt":"2026-09-02T02:00:46","slug":"hardness-testing-for-coatings-methods-standards-and-practical-guide","status":"publish","type":"post","link":"https:\/\/hardnesstests.com\/de\/hardness-testing-for-coatings-methods-standards-and-practical-guide\/","title":{"rendered":"Hardness Testing for Coatings: Methods, Standards, and Practical Guide"},"content":{"rendered":"<p class=\"wp-block-paragraph\"><strong>Hardness testing for coatings<\/strong> is an important part of quality control for painted surfaces, protective films, electroplated layers, PVD coatings, ceramic coatings, and other surface treatments.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A coating may be designed to improve wear resistance, scratch resistance, corrosion protection, appearance, or service life. However, simply measuring the hardness of the coating isn&#8217;t always straightforward. A coating can be very thin, while the underlying substrate may be much softer or harder. If the test conditions aren&#8217;t carefully controlled, the measured value may reflect the substrate rather than the coating itself.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Different coating systems therefore require different testing techniques.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For relatively thick paint films, pencil hardness testing may be appropriate for evaluating resistance to surface scratching. For thin or hard engineering coatings, micro-Vickers testing or nanoindentation can provide more quantitative information. Scratch testing may also be used when adhesion and resistance to scratching are important.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The right approach depends on <strong>coating type, thickness, substrate, hardness range, test objective, and applicable standard<\/strong>.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-why-hardness-testing-for-coatings-matters\"><strong>Why Hardness Testing for Coatings Matters<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Coatings are often applied because the surface needs properties that the underlying material doesn&#8217;t naturally provide.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A coating may be used to:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Improve wear resistance<\/li>\n\n\n\n<li>Reduce friction<\/li>\n\n\n\n<li>Protect against corrosion<\/li>\n\n\n\n<li>Increase scratch resistance<\/li>\n\n\n\n<li>Improve surface durability<\/li>\n\n\n\n<li>Extend component life<\/li>\n\n\n\n<li>Provide electrical or thermal properties<\/li>\n\n\n\n<li>Improve appearance<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Hardness testing helps manufacturers evaluate whether a coating has achieved the intended surface performance.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For example, a decorative paint coating may need sufficient resistance to scratching during transportation and handling. A hard PVD coating on a cutting tool, on the other hand, may need to withstand severe abrasive and mechanical loads.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">These two applications shouldn&#8217;t be tested using the same hardness method.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-what-does-coating-hardness-mean\"><strong>What Does Coating Hardness Mean?<\/strong><\/h1>\n\n\n\n<p class=\"wp-block-paragraph\">Coating hardness can refer to several related but different properties.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-surface-hardness\"><strong>Surface Hardness<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Surface hardness describes resistance to localized deformation or penetration.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This can be evaluated using indentation-based techniques when the coating is sufficiently thick and the test conditions are appropriate.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-scratch-resistance\"><strong>Scratch Resistance<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Scratch resistance describes how well the coating withstands damage from a sharp or controlled contact.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A scratch test isn&#8217;t necessarily the same thing as an indentation hardness test.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A coating may have high indentation hardness but behave differently under scratching, impact, or abrasive wear.<\/p>\n\n\n\n<figure class=\"wp-block-image aligncenter size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"800\" height=\"800\" src=\"https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/28-800x800.jpg\" alt=\"\" class=\"wp-image-30280\" srcset=\"https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/28-800x800.jpg 800w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/28-300x300.jpg 300w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/28-150x150.jpg 150w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/28-768x768.jpg 768w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/28-12x12.jpg 12w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/28-400x400.jpg 400w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/28-700x700.jpg 700w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/28.jpg 1024w\" sizes=\"auto, (max-width: 800px) 100vw, 800px\" \/><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-indentation-hardness\"><strong>Indentation Hardness<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Indentation testing applies a controlled force through an indenter and measures the resulting deformation.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Vickers and nanoindentation methods are examples.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For thin coatings, indentation depth must be carefully controlled to reduce the influence of the substrate.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-common-types-of-coatings-tested\"><strong>Common Types of Coatings Tested<\/strong><\/h1>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-paint-and-protective-coatings\"><strong>Paint and Protective Coatings<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Paint and polymer-based coatings are widely used for:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Automotive parts<\/li>\n\n\n\n<li>Appliances<\/li>\n\n\n\n<li>Machinery<\/li>\n\n\n\n<li>Building materials<\/li>\n\n\n\n<li>Metal structures<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Pencil hardness is commonly used to assess scratch or gouge resistance of coating systems.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-pvd-and-cvd-coatings\"><strong>PVD and CVD Coatings<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Physical vapor deposition and chemical vapor deposition coatings can be extremely thin and hard.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Typical applications include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Cutting tools<\/li>\n\n\n\n<li>Dies<\/li>\n\n\n\n<li>Molds<\/li>\n\n\n\n<li>Wear components<\/li>\n\n\n\n<li>Precision mechanical parts<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Because these coatings can be only a few micrometers thick, conventional bulk hardness testing may not be appropriate.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Microindentation and nanoindentation are often more suitable.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-electroplated-coatings\"><strong>Electroplated Coatings<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Electroplated layers such as nickel or chromium may be applied to improve wear resistance, corrosion resistance, or appearance.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The coating thickness and substrate properties must be considered during hardness measurement.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-thermal-spray-coatings\"><strong>Thermal Spray Coatings<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Thermal spray processes can produce relatively thick coatings.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The resulting structure may contain pores, oxides, splats, and other features.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Cross-sectional microhardness testing can therefore be useful for evaluating the coating structure.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-ceramic-coatings\"><strong>Ceramic Coatings<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Ceramic coatings are often selected for their hardness, thermal resistance, or wear resistance.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Micro-Vickers testing and nanoindentation may be considered for thin ceramic layers.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-main-methods-for-hardness-testing-for-coatings\"><strong>Main Methods for Hardness Testing for Coatings<\/strong><\/h1>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-pencil-hardness-testing\"><strong>Pencil Hardness Testing<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Pencil hardness testing is widely used for certain paint and organic coating applications.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The method uses pencils of different hardness grades to assess the coating&#8217;s resistance to scratching or gouging under specified conditions.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It&#8217;s relatively simple and inexpensive.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">However, pencil hardness results shouldn&#8217;t be confused with a universal numerical hardness value such as HV.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The method is particularly useful when the coating specification specifically calls for pencil hardness.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-micro-vickers-hardness-testing\"><strong>Micro-Vickers Hardness Testing<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Micro-Vickers testing uses a diamond pyramid indenter and relatively low test forces.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It can be useful for:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Coating cross-sections<\/li>\n\n\n\n<li>Hard surface layers<\/li>\n\n\n\n<li>Plated coatings<\/li>\n\n\n\n<li>Thermal spray coatings<\/li>\n\n\n\n<li>Metallographische Analyse<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">The indentation must be sufficiently small compared with the coating thickness to reduce substrate influence.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-nanoindentation\"><strong>Nanoindentation<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Nanoindentation is particularly useful for very thin coatings.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It can measure mechanical response at very small indentation depths.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Potential applications include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>PVD films<\/li>\n\n\n\n<li>CVD coatings<\/li>\n\n\n\n<li>Thin ceramic layers<\/li>\n\n\n\n<li>Functional thin films<\/li>\n\n\n\n<li>Research materials<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Nanoindentation can provide information such as hardness and elastic modulus, depending on the test method and analysis.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Because the indentation is extremely small, surface roughness, calibration, indenter geometry, and data analysis become especially important.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-scratch-hardness-testing\"><strong>Scratch Hardness Testing<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Scratch testing evaluates how a coating responds to a controlled scratching force.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It can be useful for studying:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Kratzfestigkeit<\/li>\n\n\n\n<li>Coating damage<\/li>\n\n\n\n<li>Adhesion behavior<\/li>\n\n\n\n<li>Critical loads<\/li>\n\n\n\n<li>Failure mechanisms<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Scratch testing and hardness testing answer different questions, so one shouldn&#8217;t automatically be substituted for the other.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-choosing-the-right-coating-hardness-test\"><strong>Choosing the Right Coating Hardness Test<\/strong><\/h1>\n\n\n\n<p class=\"wp-block-paragraph\">The best method depends on what you&#8217;re trying to measure.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Coating Application<\/th><th>Potential Test Method<\/th><\/tr><\/thead><tbody><tr><td>Paint coating<\/td><td>Pencil hardness<\/td><\/tr><tr><td>Thick metallic coating<\/td><td>Mikro-Vickers<\/td><\/tr><tr><td>Thin PVD coating<\/td><td>Nanoindentation<\/td><\/tr><tr><td>Thin ceramic film<\/td><td>Nanoindentation<\/td><\/tr><tr><td>Thermal spray coating<\/td><td>Mikro-Vickers<\/td><\/tr><tr><td>Plated layer<\/td><td>Microhardness<\/td><\/tr><tr><td>Scratch-resistant coating<\/td><td>Scratch testing<\/td><\/tr><tr><td>Research coating<\/td><td>Nanoindentation \/ microhardness<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Before selecting equipment, define whether you need to measure <strong>indentation hardness, scratch resistance, coating adhesion, or overall wear performance<\/strong>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">These are related properties, but they aren&#8217;t interchangeable.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-how-coating-thickness-affects-hardness-results\"><strong>How Coating Thickness Affects Hardness Results<\/strong><\/h1>\n\n\n\n<p class=\"wp-block-paragraph\">Coating thickness is one of the most important factors in coating hardness testing.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Imagine a very thin hard coating deposited on a soft steel substrate.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If the indentation is too deep, the indenter begins to interact strongly with the substrate.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The measured hardness may then appear lower than the true coating hardness.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The opposite situation can also occur when a soft coating is deposited on a hard substrate.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For thin films, test depth and coating thickness must therefore be considered together.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In microindentation and nanoindentation, keeping the indentation sufficiently shallow is an important part of obtaining meaningful coating properties.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<figure class=\"wp-block-image aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"450\" height=\"450\" src=\"https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/24.jpg\" alt=\"\" class=\"wp-image-30276\" srcset=\"https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/24.jpg 450w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/24-300x300.jpg 300w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/24-150x150.jpg 150w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/24-12x12.jpg 12w, https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/24-400x400.jpg 400w\" sizes=\"auto, (max-width: 450px) 100vw, 450px\" \/><\/figure>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-substrate-effects-during-coating-testing\"><strong>Substrate Effects During Coating Testing<\/strong><\/h1>\n\n\n\n<p class=\"wp-block-paragraph\">The substrate can strongly influence the measurement.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Consider three layers:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Indenter \u2192 Coating \u2192 Substrate<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The measured response is affected by the entire deformation zone beneath the indenter.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This is why coating hardness should not automatically be compared with bulk material hardness.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For thin coatings, specialized testing procedures and data-analysis models may be necessary.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For research and advanced materials development, nanoindentation can help separate coating behavior from substrate effects when an appropriate test and analysis method is used.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-surface-preparation-and-test-conditions\"><strong>Surface Preparation and Test Conditions<\/strong><\/h1>\n\n\n\n<p class=\"wp-block-paragraph\">Surface quality matters greatly, especially for small indentation tests.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The test surface should be:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Sauber<\/li>\n\n\n\n<li>Stable<\/li>\n\n\n\n<li>Free of loose contamination<\/li>\n\n\n\n<li>Sufficiently smooth<\/li>\n\n\n\n<li>Properly supported<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">For cross-sectional testing, the coating may need to be mounted, sectioned, ground, and polished.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Care must be taken not to:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Remove the coating<\/li>\n\n\n\n<li><a href=\"https:\/\/hardnesstests.com\/de\/products\/\">Smear the coating<\/a><\/li>\n\n\n\n<li><a href=\"https:\/\/hardnesstests.com\/de\/products\/\">Round the coating edge<\/a><\/li>\n\n\n\n<li><a href=\"https:\/\/hardnesstests.com\/de\/products\/\">Introduce excessive heat<\/a><\/li>\n\n\n\n<li>Create polishing damage<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">For very thin coatings, surface roughness can be comparable to the indentation depth. In that situation, surface preparation and measurement technique become critical.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-coating-hardness-testing-standards\"><strong>Coating Hardness Testing Standards<\/strong><\/h1>\n\n\n\n<p class=\"wp-block-paragraph\">The applicable standard depends on the coating and testing method.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Common references include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>ASTM D3363<\/strong> \u2014 film hardness by pencil test<\/li>\n\n\n\n<li><strong>ISO 15184<\/strong> \u2014 paints and varnishes, determination of film hardness by pencil test<\/li>\n\n\n\n<li><strong>ASTM E384<\/strong> \u2014 microindentation hardness of materials<\/li>\n\n\n\n<li><strong>ISO 6507<\/strong> \u2014 Vickers hardness testing<\/li>\n\n\n\n<li><strong>ASTM E2546<\/strong> \u2014 instrumented indentation testing<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">For specific coatings, additional industry standards may apply.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For example, automotive, aerospace, medical, tooling, and decorative coatings may each have their own testing specifications.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Always verify the latest edition of the applicable standard and any customer-specific requirements.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Die <a href=\"https:\/\/www.astm.org\/\">ASTM International<\/a> website provides information about ASTM standards.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-common-testing-errors\"><strong>H\u00e4ufige Fehler bei Tests<\/strong><\/h1>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-testing-a-coating-that-is-too-thin\"><strong>Testing a Coating That Is Too Thin<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A conventional indentation may penetrate too deeply and measure the substrate.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-ignoring-surface-roughness\"><strong>Ignoring Surface Roughness<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Rough surfaces can produce inconsistent indentation measurements.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-using-excessive-test-force\"><strong>Using Excessive Test Force<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">High force can make the substrate contribution significant.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-testing-near-defects\"><strong>Testing Near Defects<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Pinholes, cracks, pores, inclusions, or coating particles can produce unrepresentative results.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-poor-cross-section-preparation\"><strong>Poor Cross-Section Preparation<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">For thin coating measurements, an uneven or rounded cross-section can make accurate indentation placement difficult.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-confusing-hardness-with-adhesion\"><strong>Confusing Hardness With Adhesion<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A coating can be hard but poorly bonded.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Hardness and adhesion should be tested separately when both properties are important.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-ignoring-coating-thickness\"><strong>Ignoring Coating Thickness<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The same coating material can produce different apparent hardness values when deposited at different thicknesses and tested under unsuitable conditions.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-how-to-choose-a-coating-hardness-tester\"><strong>How to Choose a Coating Hardness Tester<\/strong><\/h1>\n\n\n\n<p class=\"wp-block-paragraph\">Before purchasing equipment, answer several basic questions:<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li>What type of coating are you testing?<\/li>\n\n\n\n<li>What is the approximate coating thickness?<\/li>\n\n\n\n<li>What is the substrate material?<\/li>\n\n\n\n<li>Is the coating metallic, ceramic, polymeric, or paint?<\/li>\n\n\n\n<li>Do you need scratch resistance or indentation hardness?<\/li>\n\n\n\n<li>What hardness range is expected?<\/li>\n\n\n\n<li>What test force is required?<\/li>\n\n\n\n<li>Is cross-sectional testing necessary?<\/li>\n\n\n\n<li>Which standard applies?<\/li>\n\n\n\n<li>Do you need automatic measurement and data analysis?<\/li>\n<\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">For conventional paint coatings, a pencil hardness tester may be sufficient.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For relatively thick metallic or thermal spray coatings, a microhardness tester can be a better choice.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For very thin PVD, CVD, or ceramic coatings, a <strong>nanoindentation system<\/strong> may provide the level of measurement control required.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-frequently-asked-questions\"><strong>H\u00e4ufig gestellte Fragen<\/strong><\/h1>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-1-what-is-the-best-method-for-hardness-testing-for-coatings\"><strong>1. What is the best method for hardness testing for coatings?<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">There is no single best method. Pencil testing can be suitable for paint coatings, micro-Vickers for suitable thicker or cross-sectional coatings, and nanoindentation for very thin hard films.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-2-can-a-vickers-hardness-tester-measure-coatings\"><strong>2. Can a Vickers hardness tester measure coatings?<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Yes, provided the coating thickness, test force, indentation size, surface condition, and substrate are appropriate for the method.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-3-how-thick-should-a-coating-be-for-microhardness-testing\"><strong>3. How thick should a coating be for microhardness testing?<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">There is no universal thickness requirement. The test force and indentation depth must be selected so that substrate influence is sufficiently controlled according to the applicable procedure.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-4-what-is-the-difference-between-coating-hardness-and-scratch-resistance\"><strong>4. What is the difference between coating hardness and scratch resistance?<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Hardness generally describes resistance to localized deformation, while scratch resistance describes the coating&#8217;s ability to resist damage from a controlled scratching action. They aren&#8217;t identical properties.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-5-can-nanoindentation-measure-very-thin-coatings\"><strong>5. Can nanoindentation measure very thin coatings?<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Yes. Nanoindentation is specifically useful for thin films because it can operate at very small indentation depths. Proper calibration, surface preparation, and substrate-effect analysis are essential.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-6-does-coating-thickness-affect-hardness-testing\"><strong>6. Does coating thickness affect hardness testing?<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Yes. If the indentation is too deep relative to the coating thickness, the substrate can significantly influence the measured result.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-7-can-hardness-testing-determine-coating-adhesion\"><strong>7. Can hardness testing determine coating adhesion?<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">No. Hardness and adhesion are different properties. A separate adhesion test may be required to evaluate how strongly a coating is bonded to its substrate.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-8-why-is-surface-preparation-important-for-coating-hardness-testing\"><strong>8. Why is surface preparation important for coating hardness testing?<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Small indentations can be strongly affected by surface roughness, contamination, polishing damage, or coating defects. Proper preparation improves measurement reliability.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h1 class=\"wp-block-heading\" id=\"h-conclusion\"><strong>Schlussfolgerung<\/strong><\/h1>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Hardness testing for coatings<\/strong> requires a different approach from conventional bulk-material hardness testing because coatings are often thin and their properties can be strongly influenced by the underlying substrate.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For paint and organic coatings, pencil hardness testing can provide a practical assessment of scratch or gouge resistance. For metallic and thermal spray coatings, micro-Vickers testing may provide useful quantitative measurements. For very thin PVD, CVD, and ceramic films, nanoindentation can offer much greater control over indentation depth and localized mechanical-property measurement.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The most important factors are <strong>coating type, coating thickness, substrate material, surface condition, test force, indentation depth, and applicable standard<\/strong>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A reliable coating hardness test isn&#8217;t simply about making an indentation and recording a number. The test conditions must be selected so that the result represents the coating rather than an uncontrolled combination of coating and substrate. When the method is properly matched to the application, hardness testing becomes a powerful tool for coating development, process control, and quality assurance.<\/p>","protected":false},"excerpt":{"rendered":"<p>Hardness testing for coatings is an important part of quality control for painted surfaces, protective films, electroplated layers, PVD coatings,<\/p>","protected":false},"author":4,"featured_media":30254,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[117],"tags":[207],"class_list":["post-31171","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-hardness-tester","tag-hardness-testing-for-coatings"],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v25.4 (Yoast SEO v28.1) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>Hardness Testing for Coatings: Methods, Standards<\/title>\n<meta name=\"description\" content=\"Learn about hardness testing for coatings, including pencil hardness, microhardness, nanoindentation, coating thickness effects.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/hardnesstests.com\/de\/hardness-testing-for-coatings-methods-standards-and-practical-guide\/\" \/>\n<meta property=\"og:locale\" content=\"de_DE\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Hardness Testing for Coatings: Methods, Standards, and Practical Guide\" \/>\n<meta property=\"og:description\" content=\"Learn about hardness testing for coatings, including pencil hardness, microhardness, nanoindentation, coating thickness effects.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/hardnesstests.com\/de\/hardness-testing-for-coatings-methods-standards-and-practical-guide\/\" \/>\n<meta property=\"og:site_name\" content=\"hardnesstests\" \/>\n<meta property=\"article:published_time\" content=\"2026-09-02T02:00:44+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-09-02T02:00:46+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/19.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"736\" \/>\n\t<meta property=\"og:image:height\" content=\"552\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"tingting\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Geschrieben von\" \/>\n\t<meta name=\"twitter:data1\" content=\"tingting\" \/>\n\t<meta name=\"twitter:label2\" content=\"Gesch\u00e4tzte Lesezeit\" \/>\n\t<meta name=\"twitter:data2\" content=\"12\u00a0Minuten\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/hardness-testing-for-coatings-methods-standards-and-practical-guide\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/hardness-testing-for-coatings-methods-standards-and-practical-guide\\\/\"},\"author\":{\"name\":\"tingting\",\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/#\\\/schema\\\/person\\\/4dfcde616788fc5d9ece9551a87be8ce\"},\"headline\":\"Hardness Testing for Coatings: Methods, Standards, and Practical Guide\",\"datePublished\":\"2026-09-02T02:00:44+00:00\",\"dateModified\":\"2026-09-02T02:00:46+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/hardness-testing-for-coatings-methods-standards-and-practical-guide\\\/\"},\"wordCount\":1960,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/hardness-testing-for-coatings-methods-standards-and-practical-guide\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/hardnesstests.com\\\/wp-content\\\/uploads\\\/2026\\\/01\\\/19.jpg\",\"keywords\":[\"hardness testing for coatings\"],\"articleSection\":[\"Hardness Tester\"],\"inLanguage\":\"de-CH\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/hardnesstests.com\\\/hardness-testing-for-coatings-methods-standards-and-practical-guide\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/hardness-testing-for-coatings-methods-standards-and-practical-guide\\\/\",\"url\":\"https:\\\/\\\/hardnesstests.com\\\/hardness-testing-for-coatings-methods-standards-and-practical-guide\\\/\",\"name\":\"Hardness Testing for Coatings: Methods, Standards\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/hardness-testing-for-coatings-methods-standards-and-practical-guide\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/hardness-testing-for-coatings-methods-standards-and-practical-guide\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/hardnesstests.com\\\/wp-content\\\/uploads\\\/2026\\\/01\\\/19.jpg\",\"datePublished\":\"2026-09-02T02:00:44+00:00\",\"dateModified\":\"2026-09-02T02:00:46+00:00\",\"description\":\"Learn about hardness testing for coatings, including pencil hardness, microhardness, nanoindentation, coating thickness effects.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/hardness-testing-for-coatings-methods-standards-and-practical-guide\\\/#breadcrumb\"},\"inLanguage\":\"de-CH\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/hardnesstests.com\\\/hardness-testing-for-coatings-methods-standards-and-practical-guide\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"de-CH\",\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/hardness-testing-for-coatings-methods-standards-and-practical-guide\\\/#primaryimage\",\"url\":\"https:\\\/\\\/hardnesstests.com\\\/wp-content\\\/uploads\\\/2026\\\/01\\\/19.jpg\",\"contentUrl\":\"https:\\\/\\\/hardnesstests.com\\\/wp-content\\\/uploads\\\/2026\\\/01\\\/19.jpg\",\"width\":736,\"height\":552},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/hardness-testing-for-coatings-methods-standards-and-practical-guide\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"\u9996\u9875\",\"item\":\"https:\\\/\\\/hardnesstests.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Hardness Testing for Coatings: Methods, Standards, and Practical Guide\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/#website\",\"url\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/\",\"name\":\"hardnesstests\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"de-CH\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/#organization\",\"name\":\"hardnesstests\",\"url\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"de-CH\",\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/hardnesstests.com\\\/wp-content\\\/uploads\\\/2021\\\/08\\\/\u5fae\u4fe1\u56fe\u7247_20251029102004_335_1287.png\",\"contentUrl\":\"https:\\\/\\\/hardnesstests.com\\\/wp-content\\\/uploads\\\/2021\\\/08\\\/\u5fae\u4fe1\u56fe\u7247_20251029102004_335_1287.png\",\"width\":1308,\"height\":467,\"caption\":\"hardnesstests\"},\"image\":{\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/hardnesstests.com\\\/tr\\\/#\\\/schema\\\/person\\\/4dfcde616788fc5d9ece9551a87be8ce\",\"name\":\"tingting\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"de-CH\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/860054326773b5d7efd55599c34646197790b492767738ff1ddf0e0ba0e05c7d?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/860054326773b5d7efd55599c34646197790b492767738ff1ddf0e0ba0e05c7d?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/860054326773b5d7efd55599c34646197790b492767738ff1ddf0e0ba0e05c7d?s=96&d=mm&r=g\",\"caption\":\"tingting\"},\"url\":\"https:\\\/\\\/hardnesstests.com\\\/de\\\/author\\\/tingting\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Hardness Testing for Coatings: Methods, Standards","description":"Learn about hardness testing for coatings, including pencil hardness, microhardness, nanoindentation, coating thickness effects.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/hardnesstests.com\/de\/hardness-testing-for-coatings-methods-standards-and-practical-guide\/","og_locale":"de_DE","og_type":"article","og_title":"Hardness Testing for Coatings: Methods, Standards, and Practical Guide","og_description":"Learn about hardness testing for coatings, including pencil hardness, microhardness, nanoindentation, coating thickness effects.","og_url":"https:\/\/hardnesstests.com\/de\/hardness-testing-for-coatings-methods-standards-and-practical-guide\/","og_site_name":"hardnesstests","article_published_time":"2026-09-02T02:00:44+00:00","article_modified_time":"2026-09-02T02:00:46+00:00","og_image":[{"width":736,"height":552,"url":"https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/19.jpg","type":"image\/jpeg"}],"author":"tingting","twitter_card":"summary_large_image","twitter_misc":{"Geschrieben von":"tingting","Gesch\u00e4tzte Lesezeit":"12\u00a0Minuten"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/hardnesstests.com\/hardness-testing-for-coatings-methods-standards-and-practical-guide\/#article","isPartOf":{"@id":"https:\/\/hardnesstests.com\/hardness-testing-for-coatings-methods-standards-and-practical-guide\/"},"author":{"name":"tingting","@id":"https:\/\/hardnesstests.com\/tr\/#\/schema\/person\/4dfcde616788fc5d9ece9551a87be8ce"},"headline":"Hardness Testing for Coatings: Methods, Standards, and Practical Guide","datePublished":"2026-09-02T02:00:44+00:00","dateModified":"2026-09-02T02:00:46+00:00","mainEntityOfPage":{"@id":"https:\/\/hardnesstests.com\/hardness-testing-for-coatings-methods-standards-and-practical-guide\/"},"wordCount":1960,"commentCount":0,"publisher":{"@id":"https:\/\/hardnesstests.com\/tr\/#organization"},"image":{"@id":"https:\/\/hardnesstests.com\/hardness-testing-for-coatings-methods-standards-and-practical-guide\/#primaryimage"},"thumbnailUrl":"https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/19.jpg","keywords":["hardness testing for coatings"],"articleSection":["Hardness Tester"],"inLanguage":"de-CH","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/hardnesstests.com\/hardness-testing-for-coatings-methods-standards-and-practical-guide\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/hardnesstests.com\/hardness-testing-for-coatings-methods-standards-and-practical-guide\/","url":"https:\/\/hardnesstests.com\/hardness-testing-for-coatings-methods-standards-and-practical-guide\/","name":"Hardness Testing for Coatings: Methods, Standards","isPartOf":{"@id":"https:\/\/hardnesstests.com\/tr\/#website"},"primaryImageOfPage":{"@id":"https:\/\/hardnesstests.com\/hardness-testing-for-coatings-methods-standards-and-practical-guide\/#primaryimage"},"image":{"@id":"https:\/\/hardnesstests.com\/hardness-testing-for-coatings-methods-standards-and-practical-guide\/#primaryimage"},"thumbnailUrl":"https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/19.jpg","datePublished":"2026-09-02T02:00:44+00:00","dateModified":"2026-09-02T02:00:46+00:00","description":"Learn about hardness testing for coatings, including pencil hardness, microhardness, nanoindentation, coating thickness effects.","breadcrumb":{"@id":"https:\/\/hardnesstests.com\/hardness-testing-for-coatings-methods-standards-and-practical-guide\/#breadcrumb"},"inLanguage":"de-CH","potentialAction":[{"@type":"ReadAction","target":["https:\/\/hardnesstests.com\/hardness-testing-for-coatings-methods-standards-and-practical-guide\/"]}]},{"@type":"ImageObject","inLanguage":"de-CH","@id":"https:\/\/hardnesstests.com\/hardness-testing-for-coatings-methods-standards-and-practical-guide\/#primaryimage","url":"https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/19.jpg","contentUrl":"https:\/\/hardnesstests.com\/wp-content\/uploads\/2026\/01\/19.jpg","width":736,"height":552},{"@type":"BreadcrumbList","@id":"https:\/\/hardnesstests.com\/hardness-testing-for-coatings-methods-standards-and-practical-guide\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"\u9996\u9875","item":"https:\/\/hardnesstests.com\/"},{"@type":"ListItem","position":2,"name":"Hardness Testing for Coatings: Methods, Standards, and Practical Guide"}]},{"@type":"WebSite","@id":"https:\/\/hardnesstests.com\/tr\/#website","url":"https:\/\/hardnesstests.com\/tr\/","name":"hardnesstests","description":"","publisher":{"@id":"https:\/\/hardnesstests.com\/tr\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/hardnesstests.com\/tr\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"de-CH"},{"@type":"Organization","@id":"https:\/\/hardnesstests.com\/tr\/#organization","name":"hardnesstests","url":"https:\/\/hardnesstests.com\/tr\/","logo":{"@type":"ImageObject","inLanguage":"de-CH","@id":"https:\/\/hardnesstests.com\/tr\/#\/schema\/logo\/image\/","url":"https:\/\/hardnesstests.com\/wp-content\/uploads\/2021\/08\/\u5fae\u4fe1\u56fe\u7247_20251029102004_335_1287.png","contentUrl":"https:\/\/hardnesstests.com\/wp-content\/uploads\/2021\/08\/\u5fae\u4fe1\u56fe\u7247_20251029102004_335_1287.png","width":1308,"height":467,"caption":"hardnesstests"},"image":{"@id":"https:\/\/hardnesstests.com\/tr\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/hardnesstests.com\/tr\/#\/schema\/person\/4dfcde616788fc5d9ece9551a87be8ce","name":"tingting","image":{"@type":"ImageObject","inLanguage":"de-CH","@id":"https:\/\/secure.gravatar.com\/avatar\/860054326773b5d7efd55599c34646197790b492767738ff1ddf0e0ba0e05c7d?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/860054326773b5d7efd55599c34646197790b492767738ff1ddf0e0ba0e05c7d?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/860054326773b5d7efd55599c34646197790b492767738ff1ddf0e0ba0e05c7d?s=96&d=mm&r=g","caption":"tingting"},"url":"https:\/\/hardnesstests.com\/de\/author\/tingting\/"}]}},"_links":{"self":[{"href":"https:\/\/hardnesstests.com\/de\/wp-json\/wp\/v2\/posts\/31171","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/hardnesstests.com\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/hardnesstests.com\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/hardnesstests.com\/de\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/hardnesstests.com\/de\/wp-json\/wp\/v2\/comments?post=31171"}],"version-history":[{"count":1,"href":"https:\/\/hardnesstests.com\/de\/wp-json\/wp\/v2\/posts\/31171\/revisions"}],"predecessor-version":[{"id":31172,"href":"https:\/\/hardnesstests.com\/de\/wp-json\/wp\/v2\/posts\/31171\/revisions\/31172"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/hardnesstests.com\/de\/wp-json\/wp\/v2\/media\/30254"}],"wp:attachment":[{"href":"https:\/\/hardnesstests.com\/de\/wp-json\/wp\/v2\/media?parent=31171"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/hardnesstests.com\/de\/wp-json\/wp\/v2\/categories?post=31171"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/hardnesstests.com\/de\/wp-json\/wp\/v2\/tags?post=31171"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}